
Thanh Miter Bar "Cero"Play (Dùng M4 Inserts / Đai ốc M4) – Nâng cấp Zero-Play
- Downloads
- 5
- Likes
- 1
- Views
- 37
- Remixes
- 0
- Comments
- 0
Files 4 480 KB
- CeroPlay-MiterBars-200mm-M4S-Inserts_1784878576.3mf3MF · 104 KB
- CeroPlay-MiterBars-200mm-M4-Nuts_1784878577.3mf3MF · 115 KB
- CeroPlay-Drilling-Template_1784878578.3mf3MF · 107.8 KB
- Measurements-CeroPlay-MiterBars_1784878581.pdfPDF · 153.1 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #415005
- Category
- DIY
- Published
Description
These are a metric versions of the popular zero-play miter bars, designed for M4 hardware.
“CeroPlay” is a small wordplay: the C stands for Copy 😉
Specifications
-
Length: 200 mm
-
Base width: 18.25 mm
-
Maximum width: approx. 20 mm
-
Wedge angle: 10°
Included versions
-
Version for M4 Ruthex / CNC Kitchen short heat-set inserts
-
Version for standard M4 nuts
Additional files
-
Drilling pattern drawing
-
Drilling template for easier marking and alignment
Printing
I recommend PETG, ABS or ASA for better wear resistance, although PLA should also work for light use. The drilling template works great with PLA.
For best results:
-
0.2 mm layer height
-
3–4 perimeters
-
30%+ infill
Required Hardware
In order to use the miter bars you will need some additional hardware for each bar:
-
6x M4 inserts or M4 nuts depending on the version
-
3x M4x5mm pan head screw
-
3x M4x15mm pan head screw
-
3x large M4 washers
-
4,5mm drill
-
15mm forstner drill bit
Notes
For the adjustment and tips and tricks for building jigs with the bars I recommend the original instructions provided by the manufacturer of the original ;)
Please also keep in mind:
-
The final fit depends on your printer and the actual miter slot.
-
The 10° wedge allows very fine zero-play adjustment.
-
It is usually better to print slightly undersized and adjust the fit afterwards.
Print spec
- Formats
- 3mfpdf
- Model files
- 4
- Total size
- 480 KB
- Largest file
- 153.1 KB
0 comments
You may also like 12 models
See all-
New -
New -

-

-

-
New -
New -
New -
New -

-

-
New

