Skip to main content
F3D
Table Vise - Modular 1

5 images

DIY

Table Vise - Modular

By vc-design

Downloads
531

Files 8 22.6 MB

  • Vise_Clamp_BODY.stl.stlSTL · 2 MB
  • Vise_CLAMP_TABLECLAMP.stl.stlSTL · 3.5 MB
  • Vise_Clamp_CLAMP.stl.stlSTL · 161 KB
  • Vise_Clamp_CIRCLIPS.stl.stlSTL · 222.2 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID
#419578
Category
DIY
Published
License
Standard Digital File License

Description

This fully scalable vise can easily be resized in your slicer to suit your needs. Use it with the table clamp for a secure workbench attachment or without it as a portable standalone vise.

The robust screw mechanism provides adjustable clamping, while optional TPU jaw inserts offer extra grip and protection.

Parts Included

  • BASE – Main structure.

  • CLAMP – Sliding jaw (requires supports).

  • CLAMP INSERT (2x) – Contact surfaces (TPU recommended).

  • VISECLAMPSCREW – Clamping mechanism.

  • CIRCLIPS – Connects the screw and clamp.

  • TABLECLAMP – Workbench attachment.

  • TABLESCREW – Secures the vise to the table.

  • TABLESCREWPAD – Contact surface (TPU recommended).

Assembly Instructions

1. Assemble the vise mechanism

  1. Place the CLAMP into the BASE.

  2. Screw the VISECLAMPSCREW into the BASE until approximately 2 cm of the screw is inside the base.

  3. Connect the CLAMP to the screw by inserting the CIRCLIPS through the underside of the BASE until they snap into place.

  4. Insert the two TPU CLAMP INSERTS into the BASE and CLAMP.

2. Optional: Attach the table clamp

  1. Screw the TABLESCREW into the TABLECLAMP.

  2. Screw the TPU TABLESCREWPAD onto the end of the TABLESCREW.

  3. Slide the assembled vise onto the TABLECLAMP using the guide rails on the underside of the BASE.

Print Information

  • Supports required only for the CLAMP.

  • All other parts print without supports.

  • PLA or PETG recommended.

  • TPU recommended for the clamp inserts and table screw pad (optional).

  • Fully scalable in your slicer.

A practical little vise that adapts to your workshop and projects. :)if you enjoy this model please consider to buy me a coffee :)

Read more Show less

Print spec

Formats
stl
Model files
8
Total size
22.6 MB
Largest file
8.5 MB

0 comments

See all