
[2-PIN] Bản mod Koss KSC75 2-PIN cải tiến
Remix of [MMCX] Mod MMCX Koss KSC75 cải tiến By evyd13_3639579
- Downloads
- 11
- Likes
- 1
- Views
- 106
- Remixes
- 0
- Comments
- 0
Files 7 7.3 MB
- KSC75_improved_2-PIN_-_no_marking_1778346584.3mf3MF · 202.7 KB
- KSC75_improved_2-PIN_-_L_1778346584.3mf3MF · 204.2 KB
- KSC75_improved_2-PIN_-_R_1778346585.3mf3MF · 208.6 KB
- KSC75_improved_2-PIN_-_heart_1778346586.3mf3MF · 159.2 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #380252
- Category
- Dụng Cụ Tiện Ích
- Published
- License
- Creative Commons — Attribution
Description
I got requests to made a 0.78mm version of the same design, so here you go. It's tested and works well.
Check out this flower grill:
Make
I printed on Prusa Mini with 0.25mm nozzle and 0.07mm layer height, 100% infill with Devil Design PLA.
Print with organic supports.
Parts and supplies needed
-
2x M2(.3 might work better) self tapping 4-6mm screw with flat bottom. Like the ones found in plastic housings.
https://nl.aliexpress.com/item/1005005264316197.html -
2x printed parts. choose the design you like 😀 L/R/heart/no marking or something you want yourself. files are there!!
-
Glue (I use two component glue)
-
2x 2-pin connectors (if you can find them pre-wired, that would be great)
https://nl.aliexpress.com/item/1005003354903218.html -
2x short pieces of headphone wire. I cut it from broken headphone wire, but you can use these as well:
https://nl.aliexpress.com/item/1005004026757882.html
How to
-
print parts
-
remove supports, and with a small knife, remove any pieces in the opening that are left of the supports
-
prepare the 2-pin connector with wires (solder)
-
glue the 2-pin connector to the part
-
wait for glue to harden
-
solder to driver
-
close with screws
-
enjoy
Print spec
- Formats
- 3mff3df3zstep
- Model files
- 7
- Total size
- 7.3 MB
- Largest file
- 4.2 MB
0 comments
You may also like 12 models
See all-
New -

-

-

-
New -
New -

-
New -

-

-

-

![[2-PIN] Bản mod Koss KSC75 2-PIN cải tiến 1](https://cdn.f3d-ai.com/uploads/public/69f/f53/cb9/69ff53cb9921d602396660.jpg?class=w1600)
![[2-PIN] Bản mod Koss KSC75 2-PIN cải tiến 2](https://cdn.f3d-ai.com/uploads/public/69f/f53/cd2/69ff53cd2360a700399002.png?class=w1600)