Pocket Memory — SD & microSD Case | Print in Place

Features

• Compact closed dimensions: approximately 61.4 × 51.2 × 6.4 mm, including the hinge and opening tabs.

• Print-in-place hinge: the lid and base print together in the open position.

• Integrated snap closure and side guides to limit sideways movement when closed.

• Broad opening tabs and card-access recesses.

• No screws, magnets, separate hinge pin or elastic band.

• Single-color printing; no AMS required.

• Print at 100% scale, flat and open in the supplied STL orientation. Do not separate or rearrange the two moving parts.

If you print one, share a photo and let me know which layout you chose!

--3Dwake