[MMCX] Mod MMCX Koss KSC75 cải tiến

Other designs didn't really fit the bill. One limited the tilt of the driver, the other seems very bulky. I designed this myself in Fusion and it seems to work perfectly. I regained the tilt and it covers the solder area of the driver nicely.

Make

I printed on Prusa Mini with 0.25mm nozzle and 0.07mm layer height, 100% infill with Devil Design PLA.

Please excuse the dirty screws I used, they came from a water damaged Tamagotchi.

Parts and supplies needed

• 2x M2(.3 might work better) self tapping 4-6mm screw with flat bottom. Like the ones found in plastic housings.
  https://nl.aliexpress.com/item/1005005264316197.html

• 2x printed parts. choose the design you like 😀 L/R/heart/no marking or something you want yourself. files are there!!

• Glue (I use two component glue)

• 2x MMCX sockets (for 3mm hole)
  https://nl.aliexpress.com/item/1005004039277855.html

How to

1. print parts

2. glue mmcx to the part (you may have to make the hole larger, for my printer I did not)

3. wait for glue to harden

4. solder to driver

5. close with screws

6. enjooy