Skip to main content
F3D
Tay quay nhanh cho ê-tô phay (Mill Vise Speed Handle) 1

5 images

DIY

Tay quay nhanh cho ê-tô phay (Mill Vise Speed Handle)

By kaje

Downloads
106
Likes
9
Views
896

Files 3 13.6 MB

  • visehandle-handle_1777151333.3mf3MF · 1.2 MB
  • visehandle-handle_1777151334.stlSTL · 5 MB
  • visehandle-handle_02mm_pla_mk3s_2h42m_1777151336.gcodeGCODE · 7.4 MB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID
#339033
Category
DIY
Published

Description

https://www.printables.com/model/861178-mill-vise-speed-handle-remix-modified-crank

This speed handle was made for the 4" (100mm) vise I use on my bench-top mill. Of course different vises have different sizes and shapes for attaching a vise handle, so this may or may not work for your vise.

My vise came with a long metal detachable handle, but this is inconvenient to use when setting up material in the vise. This speed handle is intended to be used to make it easier to initially position work in the vise as it makes it easier to tighten or loosen the vise as necessary; after that the metal handle can be used for final tightening of the vise.

Note that the crank handle on this is fixed (non-rotating), as I opted to keep the design simple.

Here is more information on my vise :

https://sites.google.com/site/lagadoacademy/machining---lathes-mills-etc/review---milling-vise

The handle fitting for the vise is hexagonal - 15mm across the flats and 25mm long.

The OnShape 3D CAD file for this :

https://cad.onshape.com/documents/486cc47efe41d78409dec139/w/a77fb9198589af7459093575/e/91bc280a2ff6e7ddfcc99424

Print in PLA using the 3mf file provided; otherwise:

I printed over-all with 10% linear infill and 2 perimeters, but I used modifiers to add additional infill and perimeters around the socket, and additional perimeters for the crank handle.

Read more Show less

Print spec

Formats
3mfgcodestl
Model files
3
Total size
13.6 MB
Largest file
7.4 MB

0 comments

See all