Skip to main content
F3D
Dụng cụ luồn cáp cho ống xoắn có rãnh 1

1 image

DIY

Dụng cụ luồn cáp cho ống xoắn có rãnh

By Chris_Hill

Downloads
820
Likes
420
Views
3,776

Files 2 445.5 KB

  • convoluted_tube_tool_with_webs_23mm_1765733890.stlSTL · 271.4 KB
  • convoluted_tube_tool_23mm_1765733891.stlSTL · 174.1 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID
#94577
Category
DIY
Published

Description

*** Update 22/12/2023 ***

Added a version with webs between the legs and the angled tube, to make it easier to insert the tool into the tube, and to add strength to the legs.

Inserting cables into long lengths of split convoluted tube can be a slow and painful process.

This tool makes it a lot easier, by forcing open the tube and providing a channel to feed the cable into.  You then simply slide the tool along the slit.  It can be removed and reinserted at any point along the tube.

If printed at 100%, the supplied STL is suitable for convoluted tube with an internal diameter of 23 mm and cables up to ~10.5 mm outside diameter.  By printing the tool at different scales it will suit other popular sizes of convoluted tube:

     Scale     

Convoluted tube internal diameter

Cable outside diameter

100%

23 mm

10.5 mm

83%

19 mm

8.5 mm

70%

16 mm

7 mm

48%

11 mm

5 mm

30%

7 mm

3 mm

The model shown in the photo was printed at 48% to suit a convoluted tube with an internal diameter of 11 mm.  The cable shown has an outside diameter of 5mm.

Print settings

I printed mine in PETG, with 100% infill to make it as strong as possible.  It prints in the supplied orientation without any supports, but I'd advise adding a brim to help adhesion, as the edges that touch the build plate are quite long and thin.

Read more Show less

Print spec

Formats
stl
Model files
2
Total size
445.5 KB
Largest file
271.4 KB

0 comments

See all