
Neo khóa rãnh miter cho ván lông vũ hoặc đồ gá
- Downloads
- 133
- Likes
- 23
- Views
- 833
- Remixes
- 1
- Comments
- 0
Files 1 43.1 KB
- Miter_slot_anchor_insert_1765711877.stlSTL · 43.1 KB
Make a variant with AI
Build another version of this model.
Remix versions 1
See all 1 remixDetails
- Model ID
- #87915
- Category
- DIY
- Published
- License
- Creative Commons — Attribution
Description
I created this to replace a missing anchor, but it can be used with any number of home-made jigs, feather boards or holders that need to be secured in a miter slot.
Fits standard 3/8" x 3/4" miter slot. Insert a machine screw up through the anchor and feather board / jig, then tighten with a wingnut or knob to expand the anchor in the miter slot and secure the jig.
If replacing an anchor on an existing feather board or jig, just use the machine screw, O-ring and knob that came with the feather board. The screw hole is sized for a SAE 10-24 flat head machine screw: the O-ring prevents the head turning / slipping when tightening from above.
I printed this with a 0.8mm nozzle and 0.32mm (draft quality) layer height, took about 15 minutes using a Crealty ender 3v2. Worked perfectly without any sanding or adjustment.
Print spec
- Formats
- stl
- Model files
- 1
- Total size
- 43.1 KB
- Largest file
- 43.1 KB
0 comments
You may also like 12 models
See all-
New -
New -

-

-

-

-

-
New -

-
New -
New -
New


