
Vỏ máy tính Z80-Retro cho bo mạch John Winans
- Downloads
- 18
- Likes
- 8
- Views
- 345
- Remixes
- 0
- Comments
- 0
Files 8 1.7 MB
- Top-2063-z80-vdp_1765646251.3mf3MF · 551.2 KB
- Bottom_2063-z80-vdp_1765646252.3mf3MF · 82.8 KB
- reset-pin_1765646253.3mf3MF · 125.4 KB
- reset-pin_1765646254.stepSTEP · 11.6 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #8412
- Category
- Dụng Cụ Tiện Ích
- Published
Description
John Winans, a well-known retro computer designer, created a compact Z80 computer board with I/O, RAM/ROM, all on a 100mm x 100mm PCB. I couldn't resist such a thing, so I ordered a PCB. While I waited for the board to arrive, I designed two small cases for it:
- The 2063-Z80 base system case
- The 2063-Z80 with the VDP Retro video board attached
Both cases are minimal and allow access to all the I/O ports, and are designed to use small M3 x 4mm heat-set inserts in the lid
For the VDP case, you will need:
- 4x M3 x 32mm SHCS screws coming in from the bottom.
- 2x M3 x 14mm spacers
- 2x M3 x 26mm spacers
For the smaller case:
- 4x M3 x 12mm SHCS screws
- 4x M3 x 4mm spacers
Both top covers have Zilog logo designs that you can customize the filament colors if you have a multi-filament printer like the Bambo Labs, Carbon X1.
Print spec
- Formats
- 3mfstep
- Model files
- 8
- Total size
- 1.7 MB
- Largest file
- 599.4 KB
0 comments
You may also like 12 models
See all-

-
New -

-
New -
New -

-

-

-

-

-

-


