Skip to main content
F3D
Dụng cụ giữ đầu tua vít dạng dẹt (Flat Screw Bit Holder) 1

2 images

DIY

Dụng cụ giữ đầu tua vít dạng dẹt (Flat Screw Bit Holder)

By GX3D_4257182

Downloads
10
Likes
2
Views
69

Files 3 1.7 MB

  • bike-screw-tool-grip_1785158669.fcstdFCSTD · 317.9 KB
  • bike-screw-tool-grip_1785158670.stlSTL · 1.2 MB
  • bike-screw-tool-grip_1785158671.stepSTEP · 187 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID
#416098
Category
DIY
Published

Description

Problem to solve

My bike has a few screws on the frame that are covered partly by the wheel and normal screw drivers or even allen keys cannot be used to screw or unscrew them. What I need is a flat, horizontal tool that can be brought to attach to the screws there.

Therefore I designed this little tool that takes on a standard drill bit, fixates it with a set screw and also has a long enough lever to apply the necessary force.

Printing & Assembly instructions

Printing

I used ASA+ as the material to get the extra strength needed for the handle when applying forces. I placced the tool 45° onto the printing bed and added some little mouse ears towards the end just to avoid warping. But the design is simple enough, there was not even glue needed.

Assembly

Besides the print you need the following hardware:

  • 1 M3 threaded insert, I use the one from CNC Kitchen 

  • 1 8mm M3 screw

  • A screw bit of your choice

Assembly instructions:

  1. Melt the threaded insert into the 4mm whole on the side of the tool head

  2. Use the 8mm M3 screw as a set screw and screw it into the insert until you just see the tip of the screw appearing in the central cavity

  3. Insert the screw bit into the central cavity

  4. Tighten the whole assembly with the set screw

Read more Show less

Print spec

Formats
fcstdstepstl
Model files
3
Total size
1.7 MB
Largest file
1.2 MB

0 comments

See all