
Bộ khuôn cắt ống (Jig) kiểu saddle cho thợ hàn
- Downloads
- 0
- Likes
- 0
- Views
- 37
- Remixes
- 0
- Comments
- 0
Files 16 16.4 MB
- saddle_sleeve_2.375in_22.5degrees_000_1784879100.3mf3MF · 599.6 KB
- saddle_sleeve_2.375in_22.5degrees_000_1784879101.sldprtSLDPRT · 2 MB
- saddle_sleeve_2.375in_45degrees_000_1784879103.3mf3MF · 496.1 KB
- saddle_sleeve_2.375in_45degrees_000_1784879103.sldprtSLDPRT · 1.6 MB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #415129
- Category
- DIY
- Published
- License
- Creative Commons — Attribution
Description
So far I have 2-3/8" and 2-7/8" jigs for 22.5° and 45° angles, with a relief cut in the rear in case the sleeve ID is too small. Each model has embossed text denoting its size.
I will update this with more sizes as I make them, though I am making them as they are needed so it may not happen quickly. I may also add versions with ears at the relief cut so that the sleeves may be clamped to the pipe.
I will update this post with pictures of the jigs in use as soon as I'm able.
REV 001: Increased sleeve ID to pipe OD +0.025", as original tolerance was not large enough to easily slide over pipe.
Print spec
- Formats
- 3mfsldprt
- Model files
- 16
- Total size
- 16.4 MB
- Largest file
- 2 MB












