
Vỏ hộp lọc khí Air Filter Housing
- Downloads
- 1
- Likes
- 1
- Views
- 35
- Remixes
- 0
- Comments
- 0
Files 6 1.3 MB
- ShelterFilter_1783345439.fcstdFCSTD · 659.7 KB
- ShelterFilter-FilterAssemblyBellHousing_Top_1783345440.stepSTEP · 21.4 KB
- ShelterFilter-FilterAssemblyBellHousing_Bottom_1783345440.stepSTEP · 48.2 KB
- ShelterFilter-FilterAssemblySupportStruts_1783345441.stepSTEP · 207.6 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #408749
- Category
- DIY
- Published
- License
- GNU General Public License v3.0
Description
Description
I needed to replace a quickly made air filter housing, and drew this in FreeCAD. The file is attached for modification if needed. The strut support, top, and bottom housing are all that need printing. I used a 4" flex duct flange to bolt through the strut housing into the top. The bottom connects to the strut support with either a M4 or M5 threaded rod, or 1/4" threaded rod if you modify the hole or drill it out a bit.
Parts List
6 x M4 heat set brass inserts
6 x M4 screw / lock washer / washer
1 x M5 / M4 / 1.4" threaded rod
2 x M5 / M4 / 1/4" lock washer / washer / nut
1 x Air filter
1 x 4" flex duct flange (printing optional with some modification)
Assembly
Use a soldering iron or other press to install the M4 brass inserts. The strut support sets on top of the top housing, and the flange screws through it. Use the threaded rod to hold the bottom tight to the filter.
Printing Notes
I used PLA, and the dimensions work great in terms of fit. PETG might require some tweaks. I did not need supports for the top housing, printed bolt holes down. The bottom needs support on the central hole. I used 5 walls for the top, with a 5% infill. Three layers was sufficient for the other parts, but alter as desired. There is very little tension needed to hold the bottom on to the top.
Purchased Parts
https://www.amazon.com/PATIKIL-Connector-Straight-Exhaust-Ventilation/dp/B0BRD3WNYT
Print spec
- Formats
- fcstdstep
- Model files
- 6
- Total size
- 1.3 MB
- Largest file
- 659.7 KB
0 comments
You may also like 12 models
See all-

-

-

-

-

-
New -

-

-

-

-

-


