
DIY
Giá đỡ bit hex kẹp cho dụng cụ có trục dài 1/4
- Downloads
- 18
- Likes
- 7
- Views
- 214
- Remixes
- 0
- Comments
- 0
Files 1 6.3 MB
- Hey_bit_holder_6.35mm_clip-on_v1.2_1766155700.stlSTL · 6.3 MB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #40645
- Category
- DIY
- Published
Description
A useful and compact clip-on hex bit holder for screwdrivers and other tools with long 1/4" (= 6.35 mm) shafts. It holds in place firmly by friction and allows you to always keep your 10 most used hex bits at hand.
This design is meant for flexible filaments. Scaling the model +-0.69% in the X and Y direction changes the tolerances on the hex bits by +-0.05 mm.
Print settings
- Layer height 0.2 - 0.3 mm
- Line width 0.42 mm
- Infill 25% (starting the infill 13 mm above the bed is sufficient)
- 4 wall lines
- 5 top & bottom layers
- Supports not required
Material has to be flexible / TPU.
Approximate print time @ 30 mm/s: 1:50 h
Print spec
- Formats
- stl
- Model files
- 1
- Total size
- 6.3 MB
- Largest file
- 6.3 MB
0 comments
You may also like 12 models
See all-
New -

-

-

-

-
New -
New -
New -
New -

-

-


