Giá đỡ màn hình cho K1 Lid Riser (LEOTE)

My personal model of screen mount for K1 Lid Riser by LEOTE.

Fits well on my Nexus 7. Of course you can modify SCREEN_MOUNTs  (bouth are the same) to fit your screen.

You should weld brass threads (M3x5x4) in MOUNT_BASE model. 

To screw SCREEN_MOUNT use M3 x 12mm screw.

I recommend modifying the model's MOUNT_BASE print settings to print with more perimeters. This should make thread assembly easier. In my case, I set the number of perimeters to 4.

I printed everything in PLA, and everything is stiff, nothing is breaking, and the temperature outside the enclosure isn't high. Consider using more durable materials if you want to ensure nothing will break over time.

MOUNT_HOLE_TEMPLATE is for people who have already printed the lid. You should align MOUNT_HOLE_TEMPLATE with left part of [a]_x1_K1C_V3_FRAME_FRONT and drill holes with 3mm or 4mm drill.

I don't know if whole model can be mounted on other side.

This models should fits better than on my photos because I remodeled it from the base after my assembly with  errors correction.

PARTS REQUIRED

4x

M3 x 12mm screw

4x 

M3 x 5 x 4 brass thread

Before publicity I modified SCREEN_MOUNT and I deleted top part of model. This may allow for larger screens to be mounted. I'm not sure if the angle will be sufficient to hold a device without falling.