The Lanboy - Vỏ case di động cho máy arcade BC250

Presentation

I developped, as a personnal challenge, a portable case for my bc250. This case is equipped with a 16" flat panel, and can output audio via two 2" fullrange speakers.

This project drew some attention, and I've been asked about details. I'll share files and parts list here.

Please note that this build has gone through many prototypes, and although there are a few minor things I would have done differently, it's a complete project with no drilling, sanding or cutting required.

Parts List

• Board : BC250 with open fins

• PSU : Metalfish 300W (more is okay but not mandatory, the system will start throttling down at about 150w)

• LCD Panel : https://fr.aliexpress.com/item/1005008638649167.html

• ATX breakout board : https://www.amazon.fr/dp/B0834RNJX5

• eDisplayPort adapter & cable : https://fr.aliexpress.com/item/1005006351527252.html

• USB stereo amplifier : https://fr.aliexpress.com/item/1005006165611859.html

• 2" Full-range speakers : https://fr.aliexpress.com/item/1005006957225238.html

• Latching Power Button : https://www.amazon.fr/dp/B07QP6WY7R

Connectors

• DisplayPort Loop Cable (P5B - P5A 10cm) : https://fr.aliexpress.com/item/1005011540087561.html

• 1 x power supply angled connector : https://fr.aliexpress.com/item/1005007511272892.html

• 1 x USB 180° connector : https://www.amazon.fr/dp/B0BZ4M7FYH

• Audio terminals : https://www.amazon.fr/dp/B0B7G7VNRF