Artic Liquid Freezer Mount for BC250

Arctic Liquid Freezer III Mount Bracket with Dual 80mm Fan Shrouds for ASRock BC-250

An upgraded version of my BC-250 AIO mount bracket, now featuring integrated 80mm fan shrouds on both sides. The angled shrouds direct airflow directly over the VRM, VRAM, and surrounding components — areas that get no active cooling in a standard BC-250 build.

What's included:

• Main pump mount bracket (attaches to Arctic Liquid Freezer III pump head)

• Left 80mm fan shroud with integrated grille

• Right 80mm fan shroud with integrated grille

Compatibility

• Motherboard: ASRock BC-250

• Cooler: Arctic Liquid Freezer III

• Fans: 80mm standard (4x M3 fan screws each)

Why this matters for BC-250 builds
The BC-250 uses a non-standard socket layout with no ILM or retention mechanism. Combined with the fact that SFF cases leave VRM and VRAM with little airflow, the dual fan shrouds make a real thermal difference under sustained load.

Hardware Required

• 2x M4 heat-set insert (pump attachment)

• 4x M3 screw (bracket → motherboard)

• 2x 80mm fan(optinional)

Print Settings

Setting

Value

Material

ABS or ASA (required)

Layer height

0.2mm

Infill

80%+

Walls

4

Supports

Not required

Orientation

Flat side down

⚠ The bracket sits directly on the CPU block which reaches 80°C+ under load. ABS or ASA only — PETG will deform, PLA is not suitable.