
Đế dựng màn hình thông minh ESP32-P4 Smart 86 Box
- Downloads
- 1
- Likes
- 0
- Views
- 49
- Remixes
- 0
- Comments
- 0
Files 2 27.2 KB
- body_1781199631.3mf3MF · 5.8 KB
- frame_1781199632.3mf3MF · 21.4 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #401477
- Category
- Dụng Cụ Tiện Ích
- Published
- License
- Creative Commons — Public Domain
Description
This is a small, very simple stand for those cheap esp32 p4 touch screens you can get for cheap
Some examples:
https://www.amazon.de/dp/B0FF3Z1NNL
https://de.aliexpress.com/item/1005009476605517.html
Should fit very snuggly, depending on the tolerances of your printer. Point the USB port down and get an angled USB cable do fish through the slot at the bottom. Then snap the front frame on, to cover up the edges and make it look even cleaner.
I printed it face down on the print bed, that way the edges around the screen are clean and nice, but the whole back board needs to be bridged. Which for me is not a problem, using PLA as interface layer between PETG print and supports. If you cant do that, try normal supports, or print in a different direction. any sagging on the top edge will make the fit difficult though.
For the software on my touch screens, i use esphome. There are many options though.
Print spec
- Formats
- 3mf
- Model files
- 2
- Total size
- 27.2 KB
- Largest file
- 21.4 KB
0 comments
You may also like 12 models
See all-
New -
New -
New -
New -
New -

-

-

-

-

-

-

