
Kẹp nhanh (Quick Clamp) dùng cho bàn làm việc
- Downloads
- 22
- Likes
- 11
- Views
- 166
- Remixes
- 0
- Comments
- 0
Files 2 3.2 MB
- clamp_05_1780475117.stlSTL · 2.9 MB
- bottom_jaw_07_1780475118.stlSTL · 270.8 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #396083
- Category
- DIY
- Published
Description
A quick clamp bench dog (20mm diameter holes). the excentric handle presses pretty strongly on the bench, through the top jaw, although not as much as a metal + screw part. But it is much lighter and faster. And it really works, this is not a toy!
I have added a bottom jaw so it can be used witout a bench too. In this case the strength is less than on the bench, but it can be used when glueing parts.
Printed in PETG, in strength mode (6 walls, 30% infill). PLA will work but will creep under stress, so…. The handle only needs supports, print it in the provided orientation for strength. You could print the top jaw in 95A TPU for better grip, but i havent tried.
Slide the top tongue inside the top jaw to its position as in the picture, the patterned side towards the bottom. You may have to force a little to put it in place, and then the top jaw will be strongly locked to the tongue.
Screw the red handle to the main part with a M6 x 40mm screw. Any screw head will do, but a flat head looks better. Make sure the handle is in its correct orientation (it is asymetric).
Happy printing!
And as always: PLEASE download, like, comment, post your makes. It is a real pleasure to see your prints!
Print spec
- Formats
- stl
- Model files
- 2
- Total size
- 3.2 MB
- Largest file
- 2.9 MB
0 comments
You may also like 12 models
See all-

-

-

-

-
New -
New -
New -

-

-
New -

-
New

