Skip to main content
F3D
Dust Shoe cho Spindle 500W – bản Magnetic & Flush Mount 1

7 images

DIY

Dust Shoe cho Spindle 500W – bản Magnetic & Flush Mount

Remix of Dust shoe cho spindle 500w By SupahMinah

By djos_1475_171511

Downloads
163
Likes
18
Views
1,130

Files 9 7.4 MB

  • Mount_v2_1777828272.stlSTL · 1.1 MB
  • Mount_1777828274.stlSTL · 604 KB
  • sweeper_1777828275.stlSTL · 303.8 KB
  • Hose_Adaptor_1777828276.stlSTL · 338.3 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

This is a remix of the Dust Shoe by @Birbou - the main changes are as follows:

  • Flush mounts against the bottom of the Spindle Motor to minimise Z-height loss
  • Sweeper Section mounts Magnetically using 3x2.5mm Neodymium Magnets
  • Less parts makes it faster to Print

Recommendations:

  • The Mount should be printed in ABS+ or other heat-resistant plastic - PLA will deform from the heat of the Spindle. PLA is fine for the Sweeper section - in fact, this is how I designed it to fit together best. 
  • I recommend putting some Gel type glue (eg Sellys Power Gap) into the magnet holes to ensure they stay in place.

This design works really well with the Powertec 70130 dust collection hose from Amazon. I've also included an adapter that goes into the end of the hose and lets you use it with a regular household Vax Vacuum cleaner.

UPDATES:

11 April 2023: Added a Dust Shoe “Sucker” option - I find this works really well for many operations. I've also enhanced the “Mount” to provide smoother air-flow increasing suction performance.

18th July 22: Added an optional bottom section designed to suck debris up from directly above the cutting bits for when you want to monitor your machine closely but not stand there holding a vacuum hose.

Read more Show less

Print spec

Formats
f3dstepstl
Model files
9
Total size
7.4 MB
Largest file
1.7 MB

0 comments

See all