Skip to main content
F3D
Hệ kệ treo spool filament V2… 1

9 images

Máy In 3D

Hệ kệ treo spool filament V2 (Filament Spool Shelf system - V2)

Remix of Giá đỡ cuộn sợi mô-đun - giá đỡ kệ đảo ngược By OloDeepdelver

By OloDeepdelver

Downloads
2,195
Likes
516
Views
10,059
Remixes
1

Files 11 15 MB

  • Main_ID_20_stackable_1777811071.stlSTL · 591.2 KB
  • Main_ID_20_half_size_1777811072.stlSTL · 587.2 KB
  • Cap_ID_20_1777811073.stlSTL · 151.7 KB
  • Adaptor_18mm_to_20mm_OD_20_ID_18_1777811074.stlSTL · 118.6 KB

Make a variant with AI

Build another version of this model.

Open Studio

Remix versions 1

See all 1 remix

Description

update 09/05/2023: added a 23.6mm ID version following a request, hope it helps !

This is a second iteration on my original design. I designed this simple reversible bracket system to manage my spool addiction (see pictures).

  • It uses a 20mm (or 18mm diameter wood rod, so it's fairly modular in terms of width, cut to desired size. For 18mm wood rod use the adaptor 18 to 20.
  • The system is now stackable !!! No guess work or measurement required, just install the next row of spool below the previous one (see picture).
  • Brackets can be installed up or down, or any combination of the two as long as they are aligned.
  • Backet is design so the wood rod can slide through. allowing for very wide shelf yet well supported, i.e. with as many bracket as desired per rod.
  • Once happy with the size, bracket has holes for small screw to hold the two rods in place, making the rack sturdy. Nothing will move !
  • I added some rod cap for even better flexibility of the system.

Hope it helps !

Read more Show less

Print spec

Formats
gcodestl
Model files
11
Total size
15 MB
Largest file
8.1 MB

0 comments

See all