Khối test độ chính xác giữa các máy in (Inter Printer Accuracy Test Cube)

By Hendrick_136261

Downloads: 22
Likes: 4
Views: 115
Remixes: 0
Comments: 0

Download all (.zip)· 6 files · 316.9 KB· 316.9 KB

Files 6 316.9 KB

OuterCube_OD50_T0.2_1777733119.stlSTL · 54 KB
InnerCube_OD50_T0.2_1777733120.stlSTL · 52 KB
OuterCube_OD50_T0.05_1777733121.stlSTL · 53.4 KB
InnerCube_OD50_T0.05_1777733122.stlSTL · 52 KB
OuterCube_OD50mm_T0.1_1777733122.stlSTL · 53.4 KB
InnerCube_OD50mm_T0.1_1777733123.stlSTL · 52 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID: #367040
Category: Máy In 3D
Published: 05/02/2026
License: Creative Commons — Attribution — Noncommercial
Tags: calibration
testmodel
multiple
accuracy
printers

Show more tags Show fewer tags

Description

I was really struggling trying to fit some parts which I made on my different printers. Have a flavour of mk3/mk4 and Bambu. In an effort to help me out to figure out on which access I had the problem with the accuracy I designed the following.

The Circle ( Z ), Polygon (X) and Triangle (Y) help to ensure the alignment is correct when printing on different printers. The Inner Cube should fit snugly in the Outer cube in every possible orientation. If it does then X,Y and Z are within the tolerances.

I can create multiple versions upon request if needed. These are ( OuterCube ) 50x50x50mm with a wall diameter of 3x0.42mm and wall spacing (tolerance) between OuterCube and InnterCube is 0.20 mm.

The Inner Cube should fit snugly within the Outer Cube in either the X or Y orientation.