Skip to main content
F3D
Tời nhỏ tối ưu để in 3D (Small Winch optimized for printing) 1

7 images

DIY

Tời nhỏ tối ưu để in 3D (Small Winch optimized for printing)

By tjdesign

Downloads
111
Likes
20
Views
1,069

Files 7 480.6 KB

  • Arm_1777308190.stlSTL · 74 KB
  • Square_Axis_1777308191.stlSTL · 32.9 KB
  • Axis_Anchor_1777308191.stlSTL · 76.3 KB
  • Main_frame_1777308192.stlSTL · 50.3 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

My kids have been obsessed with towing things and keep breaking the winches on their toy cards. I wanted to challenge my design skills and make something for them. It turned out to be quite a challenge to make it work the way I wanted, but I'm happy with the result. No locking mechanism, just a wind.

Just a warning: it's a bit challenging to put together, but once it's together it's very strong.

NEEDED: 3x M4x20mm screws (16mm work just fine too).

PRINT: one of each file as oriented for best results. Printed with standard .4mm nozzle and .2mm layer height.

ASSEMBLY: Look at the diagrams closely to see how the parts fit together. Some pieces use a sacrificial layer which means there is a single overhang layer that prints in the air and the rest of the piece uses it as a base. When assembling you can clear out that layer to make it easier to insert the screws. The models might look a little odd in the slicer but it will all work in the end.

First, use one screw to attach the handle to the arm. Don't attach too tightly, works best when there is some play and the handle moves freely when you crank. 

Next, you must assemble all the remaining pieces before screwing them together. Make sure the flared notches fit in the square axis and the spool pieces fit on the square axis. Screw in one side, then the other. 

Tie your string to the loop and have fun winding!

Read more Show less

Print spec

Formats
stl
Model files
7
Total size
480.6 KB
Largest file
164.1 KB

0 comments

See all