HP EliteDesk 800 G6 Mini 10" 1U Rack Mount
Byelias-sjogreenLikes0Downloads249
Dụng Cụ Tiện Ích
Giá đỡ rack 10 inch cho Unifi Cloud Key Gen2 (Rack Mount)
Remix of Đầu nối Keystone RJ45 By snowboarder_261584
- Downloads
- 113
- Likes
- 13
- Views
- 825
- Remixes
- 0
- Comments
- 0
Files 4 7.3 MB
- 10in-Rack-Unifi-CloudKey-Gen2_retention_1777257024.stlSTL · 26.8 KB
- 10in-Rack-Unifi-CloudKey-Gen2_mount_1777257025.stlSTL · 134 KB
- 10in-Rack-Unifi-CloudKey-Gen2-rev2_1777257026.stlSTL · 64.6 KB
- 10in-Rack-Unifi-CloudKey-Gen2_0.6n_0.3mm_PLA_MK3S_4h21m_1777257027.gcodeGCODE · 7 MB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #343614
- Category
- Dụng Cụ Tiện Ích
- Published
- License
- Creative Commons — Attribution
Description
10in rack mount for the Unifi Gen2 Cloud Key, with RJ45 keystone jack on faceplate, with a retention post, and centering bars on the back of the mount face.
Print face down with snug supports everywhere or organic on build plate. I would suggest PETG or another heat-resistant filament, as the Gen2CK runs around 100F in normal operation. Test prints were done in Prusament PLA at .3mm layers. horizontal layout with organic supports on build plate.
Assemble with M2.5x12 with a square nut.
REVISION 2 added 11APR24
Thicker floor with fixed retention as the previous version flexes entirely too much once mounted in the rack.
Print spec
- Formats
- gcodestl
- Model files
- 4
- Total size
- 7.3 MB
- Largest file
- 7 MB
0 comments
You may also like 12 models
See all-
-
Tai gắn tủ rack (Rack Ear) cho Switch Linksys LGS326
ByJMack_104264Likes12Downloads91 -
Steam Machine Companion Cube / Vỏ đựng Weighted Storage Cube
ByJaronLikes310Downloads1K -
mATX benchtable - Khung máy tính dạng mở
Byw3rN42Likes127Downloads935 -
Vỏ bọc/Hộp đựng ổ đĩa DVD/Blu-Ray 5.25 inch
ByTomDDLikes89Downloads574 -
Khung gắn Rack Omada Fusion 2.5G (19-inch + 10-inch)
Bybullitt168Likes0Downloads27 -
Khay Đựng RAM (DIMM/SODIMM) Xếp Chồng Tiện Lợi Cho Góc Làm Việc
ByJwidessLikes34Downloads375 -
Pát PCI Full Height cho card HBA LSI 9211-8i
ByBroBuilds3D_4455044Likes32Downloads454 -
Ốp lưng cho Samsung S22 Ultra
ByckthLikes148Downloads2.4K -
NexGen3D: Version 2 AIO Mount for the BC-250
Bynexgen-3d-printingLikes0Downloads394 -
Đế Sạc Tối Giản Có Trọng Lượng Cho Steam Controller (2026)
ByVikingptty_1943738Likes50Downloads234 -
Giá Đỡ 3 Nút Nhấn Gắn Dưới Bàn
ByBrokentooth_designsLikes30Downloads225
