
HP EliteDesk 800 G6 Mini 10" 1U Rack Mount
- Downloads
- 246
- Likes
- 0
- Views
- 0
- Remixes
- 0
- Comments
- 0
Files 3 486.5 KB
- 10inch 1u HP EliteDesk 800 G6 Mini.3mf3MF · 95.4 KB
- 10inch 1u HP EliteDesk 800 G6 Mini.stlSTL · 82.3 KB
- 10inch 1u HP EliteDesk 800 G6 Mini.f3dF3D · 308.8 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #418661
- Category
- Dụng Cụ Tiện Ích
- Published
- License
- Creative Commons — Attribution
Description
A simple snap in 10" 1U rack mount for the HP EliteDesk 800 G6 Mini. Should be compatible with ProDesk G6 models as well.
Printing
I have used dirt-cheap black PETGwhich is holding up fine. Try to avoid PLA as it probably won't hold up very well to the higher temperatures a homelab/rack may experience. I recommend PETG, ASA, ABS or some other plastic which holds up fine to temperature.
I printed with a 0.6mm nozzle on a Ender 3 v2 using default slicer settings, that worked fine and yielded a good-enough result. Any nozzle size ≤0.6mm should work fine too.
Fits on a 45° angle on a 220x220mm build plate such as the Ender 3
I printed with a 0.2mm layer height but I am sure this too can be tweaked quite a bit
No supports are needed
Print face down on the the bed
Uses about 42m or 128g of filament
Print spec
- Formats
- 3mff3dstl
- Model files
- 3
- Total size
- 486.5 KB
- Largest file
- 308.8 KB












