Skip to main content
F3D
Drill Lathe – Máy tiện mini chạy bằng máy khoan 1

5 images

DIY

Drill Lathe – Máy tiện mini chạy bằng máy khoan

By Jaidei_463100

Downloads
310
Likes
94
Views
3,550

Files 12 5.9 MB

  • Mini_Lathe_V1_-_Base_Tail_1777256728.stlSTL · 75.7 KB
  • Mini_Lathe_V1_-_Tail_stock_crank_Metric_1777256730.stlSTL · 58.7 KB
  • Mini_Lathe_V1_-_Bracket_1777256731.stlSTL · 127.8 KB
  • Mini_Lathe_V1_-_Rest_Base_1777256732.stlSTL · 151.7 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

Problem:

Need to turn small metal and wood parts but don’t need the accuracy of an expensive machine but need something better than the drill lathes seen on the internet which are made of scrap wood.

Notes:

Fits a Black and Decker 10 mm drill model DR202.

Uses file and sand paper/ sanding blocks as cutting tools and hacksaw blades as parting tools.

Tail Stock has a morse taper #1 hole to accommodate a drill chuck or a live center which can be found on Amazon and other places.

Works great for tapering masts and yard arms for model ship building; as well as small brass and aluminum parts. I have made small hardened steel parts such as firing pins; it just takes a while using files as the cutting tool.

Had started to design a cross slide and tool post but then decided that I would never use it. May add later.

Modified for publishing to be all metric.

Printed in PLA with 0.6 mm nozzle and a layer height of 0.25 mm

Bill of Materials:
 

Part

Notes

Quantity

20 mm Aluminum Extrusion 500 mm

Base ends made square and tapped for M6 x 1

2

Base Head

Printed part PLA, will require printing supports

1

Mid Base

Printed part PLA

1

Base Tail

Printed part PLA

1

Socket button head screw M6x1 x 25

Holds printed parts to end of extrusion

4

Socket button head screw M5x0.8 x 10

Holds Base parts to extrusion 

6

M5 Tee Nut

Holds Base parts to extrusion 

6

Hex nut M3x0.5

Go into nut traps in Base Head

2

Bracket

Printed part PLA

1

Socket head cap screw M3x0.50 x 25

Holds Bracket to Base Head

2

Rest Base

Printed part PLA

1

Rest Arm

Printed part PLA, will require printing supports

1

Socket head screw M5x0.8 x 10 

Holds Rest Base to extrusion

2

M5 Tee Nut

Holds Rest Base to extrusion

2

Socket button head screw M5x0.8 x 10

Holds Rest Arm to Rest Base

1

Hex nut M5x0.8 x 10

Holds Rest Arm to Rest Base

1

10mm x 26mm x 8mm Ball Bearing

Attach to Rest Arm

2

Socket button head cap screw M6-1x 22mm

Hold Bearings to Rest Arm

2

M6 flat washer

Hold Bearings to Rest Arm

2

Hex Nut M6-1

Hold Bearings to Rest Arm

2

Tool Rest Base

Printed part PLA

1

Tool Rest

Printed part PLA

1

12 mm x 60 mm steel rod 

Tool Rest Rod

1

Hex socket set screw M4x0.7 x 6

For adjusting Tool Rest height

2

Hex socket head cap screw M5x0.80 x 10 

Holds Tool Rest Base to Extrusion

2

M5 Tee Nut

Holds Tool Rest Base to Extrusion

2

Tail Stock Metric

Printed part PLA

1

Tail Stock Back Metric

Printed part PLA

1

M5 Tee Nut

Holds Tail Stock parts to Extrusion

4

Socket button head screw M5x0.8 x 10

Holds Tail Stock to Extrusion

2

Socket button head screw M5x0.8 x 16

Holds Tail Stock Back to Extrusion

2

Tail Stock Crank Metric

Printed part PLA, CA Glue onto M) Screw

1

Hex cap screw M10-1.5 x 100 mm

Used to drive Tail Stock when equipped with a drill chuck

1

Hex Nut M10-1.5

Set in Tail Stock Back

1

Hex Nut M5-0.8

CA glue into Tail Stock Crank Metric

1

Crank Handle

Printed part PLA

1

Hex socket head cap screw M5x0.80 x 30

Holds Crank Handle to Crank

1

Read more Show less

Print spec

Formats
stl
Model files
12
Total size
5.9 MB
Largest file
2.1 MB

0 comments

See all