Skip to main content
F3D
Case Raspberry Pi 4 gắn lên Prusa/Ender… 1

7 images

Máy In 3D

Case Raspberry Pi 4 gắn lên Prusa/Ender (Mountable Raspberry Pi 4 Case)

By MelSK

Downloads
272
Likes
32
Views
1,873

Files 4 950.3 KB

  • Raspberry_Pi_4_Case_Top_1777120842.stlSTL · 242.2 KB
  • Raspberry_Pi_4_Case_Bottom_1777120843.stlSTL · 105.8 KB
  • Raspberry_Pi_4_Case_Top_Pi_Camera_cut_out_and_top_mounted_fan_1777120844.stlSTL · 547.9 KB
  • Raspberry_Pi_4_Case_Top_Mounted_4010_Cover_1777120845.stlSTL · 54.4 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

Wanted a Mountable Raspberry Pi 4 Case for my Prusa, found a few others but nothing that was perfect for me so i designed one. It is designed to be mounted on the front of my Prusa but works fine on my Ender 3v2 as well so should work with most extrusion printers. I wanted it mounted at the front as it can be a nightmare plugging cables in if mounted at the back, i have it on the left but can't see why it couldn't be mounted on the right instead. 

The lid is held on by 4 m3x18mm bolts, the fan is held in by the 4 screws that came with the Noctua 40x10 and is mounted to the frame with 2 m5x12 bolts with T Nuts.

Printed at 0.2mm layer height

UPDATE 13/12/2022

Someone asked for a version with a cut out for the Pi camera ribbon cable but there isn't room between the fan and the Camera port to fit the ribbon cable. So i have uploaded a second version of the top which allows the fan so be mounted to the top of the case and also made a hole for the fan cable to go through. I have also made a simple push fit cover for the fan, i tried it with loads of 4010 fans and they are all slightly different so you may need to adjust the size in your slicer but it is a quick print. I found it is easier to put the fan cover on before screwing the fan to the case. I have added some new pictures for reference.

Thanks

Read more Show less

Print spec

Formats
stl
Model files
4
Total size
950.3 KB
Largest file
547.9 KB

0 comments

See all