
Thiết bị chuyển cuộn Filament (Filament Spool Transfer Device)
- Downloads
- 1,429
- Likes
- 275
- Views
- 15,408
- Remixes
- 0
- Comments
- 0
Files 22 11.8 MB
- 1x_32T_Gear_1777084756.stlSTL · 1.1 MB
- 1x_DriveAdapter_1777084757.stlSTL · 174.3 KB
- 1x_GearStandoff_1777084758.stlSTL · 123.1 KB
- 1x_50T_Gear_1777084759.stlSTL · 909.3 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #336627
- Category
- DIY
- Published
Description
A brief video deomonstration:
https://youtube.com/shorts/kiZKUkexKrg?si=kBOF8F9uXhrnBcDT
Inspired by the struggles of some printers to use cardboard spools, this device will ensure level winding of filament onto a new plastic spool.
Run with a 3/8" socket adapter. If you want to drive it using something else, there are 4 M3 screws in a 50mm square on the drive gear.
UPDATE 2023/01/23 : Added in the 50 tooth gear I forgot to upload.
Non-printed parts required:
5x 608 bearings (I used 608ZZ, but 2RS would work too)
8x M3 x 4 x 5 Heatset Inserts
2x 6x3 Neodidymium magnets
3x M3 nuts
Assorted M3 Hardware (Ranges from M3x12-M3x40, will update this soon)
Some Glue
Optional, but useful is a piece of PTFE tube (bowden tube sized, 4x2mm)
When gluing the diamond shaft together, use two of the bearings to ensure correct positioning.
Assembly Instructions: https://docs.google.com/document/d/17WcXDU7UAVl6RjmVkTb7mQGC5FVSP0qnfMd-afVyT7w/edit?usp=sharing
No supports Required
Printed with 4 perimeters, 40% infill, 5 top and bottom layers, and no supports.
Print spec
- Formats
- stl
- Model files
- 22
- Total size
- 11.8 MB
- Largest file
- 1.8 MB
0 comments
You may also like 12 models
See all-

-

-

-

-
New -

-
New -

-

-

-

-


