
Thước Dẫn Hướng Khoan (mm & inch) – Drill Guide Ruler
- Downloads
- 507
- Likes
- 165
- Views
- 2,597
- Remixes
- 0
- Comments
- 0
Files 63 12.3 MB
- Base_Ruler_with_seperate_engraving_1777064463.stlSTL · 1 MB
- Base_Ruler_single_file_1777064464.stlSTL · 460.8 KB
- Position_Block_1777064465.stlSTL · 155.7 KB
- Endstop_1777064466.stlSTL · 138.6 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #335640
- Category
- DIY
- Published
- License
- Standard Digital File License
Description
Drilling holes on a perfect pitch becomes a piece of cake...
Drill the 1st hole. Place a screw or loose drill in the 1st drilled hole, set the desired distance between the holes and drill the 2nd hole in mm (or 1/16 inch) accurately compared to the 1st hole. Tip: use a spirit level under the ruler, or even better, attach a small adhesive level (see example) to the ruler itself.
The base part is usable to 150mm / 6 inch. You can extend to 600mm / 24 inch with self-locking Extension Rulers (150 mm/6 inch each).
All parts can be printed without support as positioned in the STL files.
I printed with 0.4 nozzle, 0.2 layer thickness, 3-4 perimeters for strength and 15% infill.
I have added STL files of the rulerparts with separate engraving parts and as one piece.
- Update 11-11
- I have added 300-450 and 450-600mm Extension rulers. Also added an End Cap, so the position block is secured for sliding off. For early adopters: please update the 150-300mm Extension Ruler to use the extra extensions and end cap!
- Ruler parts with inch scale added! Added under [Ruler Parts Inch]
- Dust Collector added. It can slide on the ruler. It consists of 2 parts and is clicked into place using the same connection as the ruler parts. By splitting, everything can easily be printed without support. Added under [Extra Accessories]
- Update 20-05-2024
- Cut-outs for extension parts Inch Ruler were missing. This is now fixed.
- Bushings for Inch Ruler added (5/16" - 15/32", in 1/64" increments)
Size for hole in Inch (SAE) bushings:
Print spec
- Formats
- stl
- Model files
- 63
- Total size
- 12.3 MB
- Largest file
- 1.3 MB
0 comments
You may also like 12 models
See all-
New -
New -

-

-

-
New -
New -
New -

-

-
New -


