Skip to main content
F3D
Đèn Dewalt 18V kiểu Isogrid (tương thích pin 18V) 1

5 images

Dụng Cụ Tiện Ích

Đèn Dewalt 18V kiểu Isogrid (tương thích pin 18V)

By Gdoniu93_219588

Downloads
152
Likes
64
Views
2,538
Remixes
1

Files 7 15.4 MB

  • Lamp_shade_1776867202.stlSTL · 13.3 MB
  • LED_core_1776867204.stlSTL · 1.6 KB
  • Base2_1776867205.stlSTL · 125.1 KB
  • D_Base1_1776867206.stlSTL · 286.8 KB

Make a variant with AI

Build another version of this model.

Open Studio

Remix versions 1

See all 1 remix

Description

Inspired by Isogrid pattern commonly used in aerospace industry I decided to design Dewalt lamp in this style. 

This project requires some basic electronics and soldering skills. 

Additional hardware: 

16xM4x14

2x M4x25

1x XL6009

4x5.5mm rods

1x mini rocket switch

2x Cable Lug Male

Main part of the lamp is the core which can be 3d printed but I used aluminum square tube for better heat dissipation. It can be found in your local hardware store. 

You need to glue 4 strips of LED to each side of the core and then run cables through it from the top to the bottom. 

I used 12V led strips therefore you need some sort of converter from 18v to 12V DC. 

I used: XL6009 4A

From the converter you will need to connect it to the mini rocker switch and with the batter itself. 

Base 3 is equipped with slots to accommodate Cable Lug Male which are used to connect with battery cells. 

Rest of the assembly is easy as shown in the picture below. 

I recommend to print isogrid lamp shade using resin printer since it has really thin wall and a lot of details. Rest can be easily printed on the FDM printer. Recommended print orientation is depicted in the picture.

Read more Show less

Print spec

Formats
stl
Model files
7
Total size
15.4 MB
Largest file
13.3 MB

0 comments

See all