
Ốp lưng (case) cho Nextion 5"
- Downloads
- 113
- Likes
- 0
- Views
- 561
- Remixes
- 0
- Comments
- 0
Files 1 82.5 KB
- Nextion5case_1776851777.stlSTL · 82.5 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #326359
- Category
- Dụng Cụ Tiện Ích
- Published
- Tags
Description
A friend had a Nextion 5" display which I offered to print a case for, all I could find suitable was the bezel from their Web page so created a back case in Fusion 360 and this is the result. As mentioned elsewhere the bezel doesn't print well, I had to use a Brim when I did it. The model number for his PCB is NX8048K050_011 if that is of relevance.
My case prints well there is a 5mm hole for the wiring loom to exit, four 3.5mm holes to use 3x20mm screws to attach the bezel, although I designed in countersink holes they need a tidy up with a countersink tool, there are no spacers inside so care must be taken to prevent overtightening, don't ask me how I know!
Print spec
- Formats
- stl
- Model files
- 1
- Total size
- 82.5 KB
- Largest file
- 82.5 KB
0 comments
You may also like 12 models
See all-

-

-

-

-
New -

-

-

-

-

-

-


