Skip to main content
F3D
Giá gắn rack 19-inch cho Framework Mainboard… 1

18 images

Dụng Cụ Tiện Ích

Giá gắn rack 19-inch cho Framework Mainboard (dùng được như case desktop)

By Mauker

Downloads
133
Likes
67
Views
3,680

Files 11 8.7 MB

  • Back_Holder_Middle_1776506180.stlSTL · 38.9 KB
  • Back_Holder_R_1776506180.stlSTL · 33.5 KB
  • Back_Holder_L_1776506181.stlSTL · 33.5 KB
  • FW_19i_R_1776506182.stlSTL · 208.4 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

Inspired by my very first server, which happened to be an old laptop, I bring to you the 19-inch rack mount adapter for the Framework Mainboard. Breathe some new life into your old board! It can also be used as a desktop case if you don't want to rack-mount it anymore.

Do you like my models? Consider buying me a coffee ;)

Acknowledgments

This rack mount is heavily inspired by the Magmabow's remix of the original Framework desktop case. I remixed his model to fit on my 19-inch rack mount adapter, and I'm providing the modified version as well so it can be used in the rack. Huge thanks to Magmabow. :)

I have also used this model from Paul Lützner as a reference for the keystone adapters. Thanks!

Parts

  • 3x M5x10mm screws (For joining the rack mount parts together).
  • 2x M5x25mm screws (To secure the board case to the rack mount).
  • 2x M5x14mm screws (To secure the back part of the board case to the rack mount).
  • 8x M3x10mm screws (To attach the back holders).
  • 8x M3 heat inserts.
  • 7x M5 hex nuts.
  • Optional: Up to 6 keystone adapters, for USB, Ethernet, Wi-Fi antenna, HDMI, you name it.

Assembly

Case

  • You can follow the same assembly instructions as the original case, however, before snapping the parts together, add the 4 M5 hex nuts into the corners with external holes, like the pictures below.

Rack mount

  • Before assembling the parts, add the 8 M3 heat inserts to the back of both Left and Right modules.
  • Then, To join the parts, insert the 3 hex nuts into the Left and Right modules.
  • Then, join both parts together by sliding them into place. Be careful not to bend the joints while doing it.
  • After that, add the 3 M5x10mm screws. The final result should look something like the example below.
  • After that, add the two M5x25mm screws to the front, but don't screw them all the way in, this will help with alignment later.
  • Slide the Framework case into the rack-mount, with the fan holes facing the front of the mount, and align it to the screws you just put into place.
  • Screw the front M5x25mm all the way in.
  • Get the Back_Holder_R, and screw it to the back of the rack-mount and case, using two M3x10mm and one M5x14mm.
  • Get the Back_Holder_Middle and screw it to the back of the rack-mount with four M3x10mm screws. This should firmly secure the rack mount modules together.
  • Screw the other front M5x25mm all the way in.
  • Finally, add the last back holder, using the remaining M5x14mm and M3x10mm.

Optional - Keystone modules

  • To add a keystone module, simply press it into place as you would normally do. The configuration is up to you!

Rafts:

Doesn't Matter.

Supports:

Yes, for:

  • FW_19i_L.stl
  • FW_19i_R.stl

The rest can be printed without supports.

Resolution:

0.2 or 0.24

Infill:

20% or more

Filament: 

Since the computer can get hot, I'd recommend: PETG/ABS/ASA/Nylon or similar.

The back holders can be printed in PLA/PLA+.

Read more Show less

Print spec

Formats
stepstl
Model files
11
Total size
8.7 MB
Largest file
5.3 MB

0 comments

See all