Skip to main content
F3D
Bộ khuôn router làm mộng cánh bướm - 2 kích thước 1

4 images

DIY

Bộ khuôn router làm mộng cánh bướm - 2 kích thước

By angieuc_1217126

Downloads
366
Likes
74
Views
1,722

Files 4 1.3 MB

  • bowtie_template_negative_scale1_1776192415.stlSTL · 271.6 KB
  • bowtie_template_positive_scale1_1776192416.stlSTL · 414.7 KB
  • bowtie_template_positive_scale05_1776192417.stlSTL · 383.9 KB
  • bowtie_template_negative_scale05_1776192418.stlSTL · 229.4 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

This is a set of 2 router templates for a bowtie inlay or bowtie joint :

  • 1 template to route the negative part of the inlay (bowtie_template_ech1_negatif)
  • 1 template to route the bowtie itself : you still have to cut 2 tabs of the bowtie and sand them flush (bowtie_template_ech1_positif)

Size of the bowtie : 

  • 120 mm length
  • around 48 mm width
  • 30 mm at the smallest width
  • 4 mm radius in the corner

If you use both templates, make sure to use an 8 mm router bit with a 14 mm guide bushing or copy ring to have the matching radius.

 You can find the one I used here : https://www.printables.com/fr/model/975141-festool-router-guide-bushing-adapter

The height of the templates is 6 mm, so it can be used with an 5 mm guide bushing. 

I fixed the templates to the wood with double sided tape, but there are also 4 holes in the corners. If necessary, you can drill them to size and countersink them.

By tweaking the outer ring of the guide bushing with masking tape, I was able to ajust the tolerances and mill the joint in cherry wood.

Update 30.12.2024

I added two templates with approximately half the size of the first ones.

Have fun and leave a comment !

Read more Show less

Print spec

Formats
stl
Model files
4
Total size
1.3 MB
Largest file
414.7 KB

0 comments

See all