
Giá đỡ hygrometer tròn cho hộp khô
Remix of Vòng đệm cho Hygrometer RepBox By Bouggo_176606
- Downloads
- 44
- Likes
- 8
- Views
- 826
- Remixes
- 0
- Comments
- 2
Files 3 253.7 KB
- inner_ring_1767981661.stlSTL · 38.4 KB
- outer_ring_1767981662.stlSTL · 132.7 KB
- Hygro_mount_1767981663.3mf3MF · 82.7 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #29744
- Category
- Máy In 3D
- Published
- License
- GNU General Public License v2.0
Description
Even if an absolute air tightness for a dry box may not be essential, I tried it anyway ;)
Assembly:
- drill a hole with a 5cm crown drill in the box. Crown drills are usually not very accurate and you will get a slightly bigger hole. Just perfect for our purpose.
- press in the outer ring
- if necessary, fix it from the inside with some hot glue. This will provide additional sealing.
- Insert the hygrometer into the inner ring and press it in properly. The inner ring has a small notch ring for this purpose.
- now push the inner ring including the hygrometer from the inside into the outer ring as far as it will go.
I have printed the parts with a layer height of 0.30 mm/PETG. Due to the rough walls, the inner ring holds without further actions.
Optional:
You can stick a piece of blister foil inside the outer ring with very very tiny droplets of super glue. This additional modification makes it really airtight.
Test:
I have tested it without the use of the blister foil and without using hot glue. The humidity of the small box has dropped from 51% to 18% within 1h and continues to drop.
So it works as it should.
Have fun
Print spec
- Formats
- 3mfstl
- Model files
- 3
- Total size
- 253.7 KB
- Largest file
- 132.7 KB
2 comments
You may also like 12 models
See all-

-

-
New -
New -

-

-

-

-

-

-

-


