Kẹp thanh ray DIN cấu hình thấp

This DIN rail clip has a pull tab to release it from the rail. A flathead screwdriver or Allen wrench can be used to pry/hook and pull the tab.

Spacing between holes is 31mm.

Triangle symbol on the clip shows correct orientation with the mount.

Required parts:

• 2x M3x5x4 brass insert (Voron BOM standard insert) (example: Cnckitchen store)

DISCLAIMER: This model has very tight tolerances around the release tab, make sure your printer is well-calibrated to have a fully functional print.  Compatible Only with standard 35 × 7.5 DIN rail (IEC/EN 60715)

Print settings:

• 0.2mm layer height

• 4 wall perimeters

• 4 top/bottom layers

• 40% infill

• Currently only tested with ABS/ASA and PETG