Skip to main content
F3D
Giá đỡ MMX cho hệ thống Multiboard (2 phiên bản) 1
Giá đỡ MMX cho hệ thống Multiboard (2 phiên bản) 1
1 / 1

1 image

Máy In 3D

Giá đỡ MMX cho hệ thống Multiboard (2 phiên bản)

By jimmy_cr

Views
89
Download all (.zip)· 4 files · 18.2 MB· 18.2 MB

Files 4 18.2 MB

  • holder_out_on_top_R_1773997013.stlSTL · 4.6 MB
  • holder_out_on_top_L_1773997014.stlSTL · 4.6 MB
  • holder_in_on_top_R_1773997015.stlSTL · 4.6 MB
  • holder_in_on_top_L_1773997017.stlSTL · 4.4 MB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID
#259208
Category
Máy In 3D
Published

Description

Print as oriented, 3 walls, 15% Cross Hatch infill, supports only under snaps and snap hook.

Remove 2 original screws from back and 2 original screws from bottom covers of MMX, attach holder and fasten it with 4x "cap head" M3x8 screws. Hook the top and snap the bottom snaps.

You can choose from 2 versions:
- output on top (on photo - tested)
- input on top (screw holes alignment not tested)

Read more Show less

Print spec

Formats
stl
Model files
4
Total size
18.2 MB
Largest file
4.6 MB

0 comments

See all

F3D uses essential cookies so the site works. Accept all also turns on marketing cookies for traffic and ad measurement; Essential only does not. You can change this in Cookie settings. Read the cookie policy