Skip to main content
F3D
Vỏ enclosure WOPR LEDs gắn rack 1U 1

1 image

Dụng Cụ Tiện Ích

Vỏ enclosure WOPR LEDs gắn rack 1U

Remix of Tấm Che Trống 1U Cho Tủ Rack Máy Chủ By ScottGibb_242109

By aforsberg_1223867

Downloads
656
Likes
161
Views
9,729

Files 3 109 KB

  • 1U_Blank_Panel-split_1772434844.3mf3MF · 88.4 KB
  • 1U_Blank_Panel_1772434845.3mf3MF · 19.8 KB
  • boot_1772434845.pyPY · 805 B

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID
#232763
Published

Description

I’ve always been deeply fascinated with the aesthetic of WOPR, the computer from War Games (1983). The steadily changing lights that allegedly represented the state of the machine are something I’ve wanted to replicate in my server rack for years. Recently I decided that if the product didn’t exist, I’d make it.

After some recon, I learned about little 8x8 LED arrays, with the MAX7219 driver. For under $10, a 1x4 array of these arrays could be had…. and you can daisy chain them together. Three of these linked in a row fit neatly into a 1U slot.

I wired them up to a Raspberry Pi Pico running MicroPython, followed a guide to get the pins in the right spot and add the basic driver and run some demos, all seemed well. The issue is that I didn’t wan this to do anything normal: I wanted to individually control each “pixel” and do my best to replicate how WOPR looked.

After some iteration, I wound up with the following functionality:

When running, it will flip a coin per column (96 of them) to decide if that column will change at all from its previous state. If it will be changed, it flips eight coins to decide what that column will look like. It then draws the image to the display. Afterwards, it flips a 4-sided coin to decide how long it will wait before moving on and repeating the loop. I think it does a great job of replicating the methodical vibes of the WOPR indicators.

Wiring guide:
https://microcontrollerslab.com/max7219-led-dot-matrix-display-raspberry-pi-pico/

LED module:
https://www.amazon.com/dp/B07FFV537V

Driver:

https://github.com/mcauser/micropython-max7219/blob/master/max7219.py

My code:

from machine import Pin, SPI
import max7219
import random
from time import sleep
spi = SPI(0,sck=Pin(2),mosi=Pin(3))
cs = Pin(5, Pin.OUT)
display = max7219.Matrix8x8(spi, cs, 12)
display.brightness(0)
while True:
for y in range (8):
for x in range (96):
flip = random.randint(0, 1)
if (flip == 0):
flipp = random.randint(0, 1) 
if (flipp == 0):
display.pixel(x,y,1)
else:
display.pixel(x,y,0)
else:
pass
display.show()
timeflip = random.randint(0,3)
if (timeflip == 0):
sleep(1)
elif (timeflip == 1):
sleep(1.5)
elif (timeflip == 2):
sleep(2)
else:
sleep(0.5)

boot.py has been attached.

Read more Show less

Print spec

Formats
3mfpy
Model files
3
Total size
109 KB
Largest file
88.4 KB

0 comments

See all