Skip to main content
F3D
Dao rọc giấy (Razor Blade/Utility Knife) dùng heat-set inse… 1

3 images

DIY

Dao rọc giấy (Razor Blade/Utility Knife) dùng heat-set insert M3

Remix of Dao Rọc Giấy Đa Năng By TeaBreakGami_2004174

By MaximilianHa_1338447

Downloads
239
Likes
162
Views
1,576

Files 3 753.6 KB

  • Assembly_1772318845.stlSTL · 376.7 KB
  • Handel_1772318846.stlSTL · 106.1 KB
  • Grip_1772318846.stlSTL · 270.7 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID
#231687
Category
DIY
Published

Description

I redesigned the knife so that a Voron-sized M3 heat-set insert fits correctly (diameter: 5 mm, length: 4 mm). The hole diameter in the CAD model is 4.7 mm. The new design is extremely rigid, and the blade can be replaced as often as needed without degrading the structure.

BOM (list of materials):

  • 4× M3 heat-set inserts (diameter: 5 mm, length: 4 mm)

  • 2× M3 SHCS screws, length: 12 mm

  • 2× M3 SHCS screws, length: 4 mm

  • (optional: M3 washers)

Assembly: If the blade does not slide in smoothly but is correctly aligned (see last picture), loosely fasten the front screw. Place a piece of wood or PLA on top of the blade and gently tap it into position with a hammer. Always keep the wood/PLA piece between the hammer and the blade to avoid dulling the blade.

Read more Show less

Print spec

Formats
stl
Model files
3
Total size
753.6 KB
Largest file
376.7 KB

0 comments

See all