Skip to main content
F3D
Adapter Ống Hút Bụi Xoay (Vacuum Hose Pivoting Adapter) 1

8 images

DIY

Adapter Ống Hút Bụi Xoay (Vacuum Hose Pivoting Adapter)

By ksuszka_192195

Downloads
361
Likes
43
Views
1,582
Remixes
2

Files 6 14.9 MB

  • vacuum_hose_adapter_tip_insert_1770867358.stlSTL · 365 KB
  • vacuum_hose_adapter_threaded_cap_1770867359.stlSTL · 2.6 MB
  • threads_1770867361.scadSCAD · 15.4 KB
  • vacuum_hose_adapter_threaded_insert_1770867361.stlSTL · 5.9 MB

Make a variant with AI

Build another version of this model.

Open Studio

Remix versions 2

See all 2 remixes

Description

I wanted to use my vacuum cleaner for a simple dust extraction. I bought 4 meters of the cheapest vacuum hose and created this adapter to make it fit into my saw. The key feature of this adapter is an ability for the hose to pivot freely around the saw as I'm moving the saw along the cut.

Printing tips

To use it, you need to print three parts:

  • threaded insert, which should be screwed onto the hose
  • threaded cap, which is screwed onto the threaded insert
  • tip, which is inserted into the power tool

The threaded cap and the tip can be printed with no support.

I've attached two versions of the threaded insert, one plain and one with embedded support (so you don't need to configure any support inside the slicer).

The threaded insert is rather tight fit for my hose. If it is too tight for you, you can scale all parts a little bit, or use the attached OpenSCAD file and modify the part diameter by yourself.

Acknowledgments

I used the excellent thread library by Dan Kirshner.

Read more Show less

Print spec

Formats
scadstl
Model files
6
Total size
14.9 MB
Largest file
6.1 MB

0 comments

See all