Profile PrusaSlicer cho SOVOL Zero - EXPERIMENTAL

It took forever, but I have manually ported over much of the Sovol Zero profile settings from OrcaSlicer to PrusaSlicer.  

This configuration bundle INI file should include the following:

• Printer Config: SOVOL Zero - SV Zero
• Print Settings: .40 Nozzle-Brass
• Filament: SOVOL Zero - Silk PLA

It's experimental, but I think that the bulk of the settings are there and I end up with nearly identical products when sliced between the two slicers.  If anyone has any ideas on how to add things like fan and lighting control, some of the other chamber temperature settings and the like, please feel free to add them.  I will likely revisit this in the future, but for now, I'll probably just use 2 Slicers until a more official beta is added to Prusa Slicer  

NOTE:  Not all settings available in Orca Slicer seems to be available in Prusa Slicer.  Not sure why that is, but things like the Auxiliary part cooling fans do not exist, lighting control, certain upper and lower limits for speeds, accelerations and so on are also different or just missing between slicers.  USE AT YOUR OWN RISK.

I am providing a basic, small print as an example 3mf to try the profile on your own machine. I look forward to seeing the makes and tuning to the profile.