
Spacer thi công – hệ Metric & Imperial
- Downloads
- 4
- Likes
- 1
- Views
- 100
- Remixes
- 0
- Comments
- 0
Files 14 326.8 KB
- 50x1mm_1767996781.stepSTEP · 23.3 KB
- 50x2mm_1767996782.stepSTEP · 23.3 KB
- 50x3mm_1767996782.stepSTEP · 23.3 KB
- 50x4mm_1767996783.stepSTEP · 23.3 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #198916
- Category
- DIY
- Published
Description
This is a 50 × 50 mm square construction spacer designed for accurate spacing and alignment during installation work. It can be used on its own or stacked with other spacers to achieve different offset values.
The spacer includes three through-holes (6 mm, 8 mm, and 10 mm). These match common wall plug sizes and allow the spacer to clip onto plugs for positioning, or to be used as clearance holes for screws.
Spacers are available in 1, 2, 3, 4, 5, and 10 mm thicknesses, which can be combined as needed.
Printing recommendation
For proper strength and consistent thickness, the spacer should be printed solid. If using lower infill, use at least 4–5 walls and 60–80% infill to prevent compression when loaded.
PETG or ASA/ABS is recomended.
No supports are required. Print flat on the build plate.
Edit: Now also in Imperial!
Print spec
- Formats
- step
- Model files
- 14
- Total size
- 326.8 KB
- Largest file
- 23.4 KB
0 comments
You may also like 12 models
See all-

-

-

-

-
New -

-
New -
New -
New -

-

-
New

