Split Base (2 phần) cho Auto-Rewinder của Ultimate Filament Drybox

This Split (2-part) Base for Auto-Rewinder for Ultimate Filament Drybox allows printing the Base on small bed (180mm width x 180mm depth) printers such as the Bambu Lab A1 mini or the Prusa MINI.

The following render shows two split bases ready to be joined together to make one Split Base:

The following render shows two split bases joined together to make one Split Base:

The following photo shows two split bases joined together to make one Split Base - printed in different colors to show the two (identical) parts that make up a Split Base:

The following photo shows a Split Base in the filament drybox with one of two saddles attached:

Please refer to the Auto-Rewinder for Ultimate Filament Drybox design on which this Stand-Alone Auto-Rewinder is based if you need further details on how to assemble the Drum and Spring Assemblies, the Axle Assembly, or any other part that isn't new with this design.

To allow modifications, I have provided a STEP (.stp) file for the new Split Base.

3MF files have been provided for the new Split Base AND for all Auto-Rewinder parts except for the optional TPU sleeves and short saddles - to allow a complete Auto-Rewinder to be printed without you having to download the original model!

None of the parts should require supports or brims. All parts are designed for a 0.4mm nozzle at 0.2mm layer height. Default settings for walls and infill should be fine - no special values for these settings are required. I used 10% gyroid infill in these 3MF files, but the default infill percent (15%) and type (grid) are fine too.

Be sure to check out my other designs - including honeycomb storage wall (HSW) accessories, universal key covers, and a diverse collection of household accessories and 3D printing tools - on Printables at https://www.printables.com/@PhilCaruso/models