
Vỏ case ITX dạng Module cho Rack 10 inch 2U + Giá đỡ ổ cứng
- Downloads
- 291
- Likes
- 106
- Views
- 3,752
- Remixes
- 1
- Comments
- 0
Files 7 10.8 MB
- frontpanel_v1_ssd_2.5g_1766839955.3mf3MF · 31.5 KB
- tray_v1_1766839956.3mf3MF · 79 KB
- ssd_mount_frontpanel_v1_1766839957.3mf3MF · 19.1 KB
- ssd_mount_small_1766839958.3mf3MF · 7.6 KB
Make a variant with AI
Build another version of this model.
Remix versions 1
See all 1 remixDetails
- Model ID
- #180040
- Category
- Dụng Cụ Tiện Ích
- Published
Description
I designed this mini-itx case for the 10 inch rack i printed. The tray and the frontpanel are modular so you can remix the frontpanel without printing the whole model again. The case will fit a mini-itx motherboard and 3 2.5" ssds/hdds.
I designed this case so it can be printed on a 250 x 210 bed because i only own a Prusa MK3s.
Bill of Material
The list of models that need to be printed:
- 1x Tray
- 1x Frontpanel
- 1x ssd_mount_frontpanel
- 2x ssd_mount_small
Other hardware:
- 12x M3 x 4 threaded inserts
- 4x M3 x 6 threaded inserts
- 30x M3x6 bolts (i'm using DIN 912)
- 4x M3x8 or M3x10 countersunk screw
- 16mm powerbutton
- Way less than a spool of filament
Links to products below
Print specifications
The board is lifted enough from the tray so that you can print it in normal PLA. My setup is printed in PLA and is running for a couple of weeks now without any warping at all. If you want to be extra safe you can always use PETG.
This can be printed without the use of supports and i use the default settings in prusaslicer.
- Infill 15%
- skirt removed for the frontpanel if your bed is 250mm wide
- layerheight: 0.3mm
- No supports needed
Print orientation
Print the tray in the same orientation as it would go into the rack. WIth the cirular cutout on the bed.
The frontpanel needs to lay flat in the bed with the cutout for the network adapter on top, not on the bed.
The SSD mount needs to be printed with the side where the SSDs are inserted on top.
I added gcode files for the Prusa MK3s in this post. You can see the orientation when you open the files in a gcode viewer.
Hardware as shown in the pictures
The case is designed so it wil fit all standard mini-itx boards.
The setup that i'm currently using as my nas is:
Motherboard
H510M-ITX/ac
CPU
Intel I5 10500
RAM
32GB Corsair
Storage
3x Samsung evo 870 SATA and 1x Samsung evo 970 nvme
Power supply
Inter-Tech Mini-ITX PSU 200W + LRS-150-12 meanwell
Networkcard
2.5G realtek RTL8125B M.2 (replaced my wifi card with this)
OS
Unraid 7
Link to products (no affiliate links)
- Threaded inserts: https://www.amazon.com/Ktehloy-Threaded-Assortment-Printing-Components/dp/B0CLKDPN65
- M3 x 6 bolts: https://www.amazon.com/Fullerkreg-Socket-Stainless-Machine-Quantity/dp/B07CJ7PDYT
- countersunk m3 screw: https://www.amazon.nl/-/en/Caianwin-Countersunk-Stainless-Hexagon-Threaded/dp/B0D3HB7D8H
- Ethernet card https://www.amazon.com/Ethernet-Industrial-PCIExpress-Networking-Installation/dp/B0CZSCH8MB
- Power button https://www.amazon.com/XMSJSIY-Chassis-Switch-Button-Computer/dp/B0986XLJJH
if you like this model, i would greatly appreciate it if you would buy me a coffee. I spend a lot of time (and filament :D ) to finetune this model. paypal.me/jpoel91
Print spec
- Formats
- 3mfgcode
- Model files
- 7
- Total size
- 10.8 MB
- Largest file
- 7.8 MB
0 comments
You may also like 12 models
See all-

-
New -

-

-

-

-

-

-

-

-

-



