
(LEGACY) Ngăn kéo lật đôi Lack
Remix of (LEGACY) Ngăn Kéo Lật Lack By Jerrari
- Downloads
- 348
- Likes
- 131
- Views
- 1,994
- Remixes
- 0
- Comments
- 0
Files 5 9.4 MB
- Tilt_Drawer_Template_1766736277.3mf3MF · 46 KB
- Double_Tilt_Case_1766736278.3mf3MF · 159.3 KB
- Tilt_Drawer_1766736279.3mf3MF · 43.2 KB
- Double_Tilt_Case_0.2mm_PETG_MK3S_6h26m_1766736280.gcodeGCODE · 6.1 MB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #178805
- Category
- Máy In 3D
- Published
- License
- Creative Commons — Attribution
- Tags
Description
Check out the new Gen2 Models HERE
What!?… You had extra screws after assembling your printer! Hurry, you need a place to hide them!
These little tilt drawers allow for quick easy access and are great for storing your knickknacks on your lack enclosure.
*Also works great as an addition to any workbench
Features:
• Seamless alignment for that oh-so-clean look.
• Drawers are easy to tilt and remove
Print instructions
INTRO
The Tilt Drawers are part of my Lack Drawer series meaning they will pair with them. This version of the Tilt Drawer is able to fit only in single row layouts. (right side tilt drawer coming soon)
HARDWARE
• Screw Driver (Long narrow screwdriver or a screw driver with a shaft longer than 105mm )
• Screws: 3x12mm wood screw or #4 x 3/4 inch screws
• Drill bit that is smaller diameter than the wood screws
• Use printed templates to mark the hole locations on the surface you are mounting the drawer case to.

• Drill out marked locations under table or desk. (Tilt Drawers template appears different than this image)
• Assemble Double Tilt Drawer Case by sliding the base plate into the cases grooves until it clicks in place.
• Screw drawer case in place.
• Tilt the drawer and align the notch on each side with the grooves in the case. Slide drawer into place until you feel it drop in place. (removal is the opposite of this)
Filament: PLA (PETG or ABS for heavier duty storage)
Nozzle Size: 0.4mm
Print Height: 0.2-0.35mm
Infill: 10-20%
Compatible Prints:
Lack Enclosure Drawers
Lack Enclosure Drawers - Prusa Mini Edition
Lack Tilt Drawers
Print spec
- Formats
- 3mfgcode
- Model files
- 5
- Total size
- 9.4 MB
- Largest file
- 6.1 MB
0 comments
You may also like 12 models
See all-

-

-

-

-

-

-
New -

-

-

-

-
New

