Vỏ LIBRE AM-S905X-CC Le Potato

Two piece case for LIBRE AM-S905X-CC Le Potato.  Though this is my own design, I had a lot of inspiration from this design and highly recommend it if you need case for RPi 4b.

Print with your desired material.  No supports required.  Print with the flat surface down.

The top has a cutout for a 40mm x 40mm fan with screw holes sized for M3 fasteners.  There are other cutouts around the case to allow for the various different wire connections on the board to be routed outside the case.

The holes to secure the Le Potato board in place and case together are sized for M3 x 12 fasteners with a little extra room for a slightly longer screw. 

For assembly, I found it easier to install the fan to the top first, connect the fan wires and any other accessory wires to the board, then place the board onto the top.  Place the bottom of the case onto the assembly, sandwiching the board between the top and bottom.  Finally, secure with M3 x 12 fasteners.

Step Files are available for customization.