
Bộ kẹp & căn chỉnh cho Sculpfun iCube Ultra
- Downloads
- 1
- Likes
- 2
- Views
- 86
- Remixes
- 0
- Comments
- 0
Files 12 546.5 KB
- side_bar_1766190023.stlSTL · 185.7 KB
- l_alignment_block_1766190024.stlSTL · 100.2 KB
- x_horizontal_bar_1766190025.stlSTL · 57.9 KB
- y_vertikal_bar_1766190025.stlSTL · 61.8 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #169416
- Category
- DIY
- Published
Description
The Sculpfun iCube Ultra Laser comes with a non honeycomb cutting plate - this makes it difficult to clamp down wood or other parts. I Found no other solution out there so i made one myself.
I Printed the whole set in PETG.
0.2mm
no supports needed
The 2 long bars on the sides are glued with 2k epoxy glue.
Needed Hardwareparts:
- 2K Epoxy glue or other glue for the 2 side bars
- as many as possible threaded inserts -> M3x4x5
- Round 5x5 Magnets for the Bars
- string magnets for under the plate, i use 20x10x3mm (to fix the bars,L-Bars if you use them
- without height_wedge i use M3x8mm
Print spec
- Formats
- stl
- Model files
- 12
- Total size
- 546.5 KB
- Largest file
- 185.7 KB












