Skip to main content
F3D
Nerf Ontos - Khẩu chính 'Tryhard' cho dân 'Casual' 1

6 images

Large file collection Đồ Chơi Ngoài Trời

Nerf Ontos - Khẩu chính 'Tryhard' cho dân 'Casual'

By ImpulseUngin_1553260

Downloads
1,544
Likes
493
Views
10,767
Remixes
13

Files 39 65.6 MB

  • Angled_Nut_Retainer_1766185365.stlSTL · 17.4 KB
  • 3mm_spacer_1766185366.stlSTL · 213.8 KB
  • Priming_Bar_1766185367.stlSTL · 165.3 KB
  • Nut_Retainer_1766185368.stlSTL · 16.1 KB

Make a variant with AI

Build another version of this model.

Open Studio

Remix versions 13

See all 13 remixes

Description

Ontos is a tryhard primary for the filthy casual, easily hitting 170-250fps. It's low-hardware, low-budget, low-effort, and low-weight - tailor made for, and by, the lazy and the poor. Designed around only one screw size and 9 hardware items total, the BOM is a third the length of comparable springers such as the SBL and the Alchemist. For this, you get the following:

Track-based bearing prime - instead of plastic bearings on a metal barrel, Ontos has metal bearings on a plastic track. These metal bearings are smoother, more robust, and cheaper than plastic contemporaries. A flat track also has more contact area than a round barrel, resulting in a smoother ride. On prototypes, you can't even feel the bearings rolling. This is effectively "linear rail at home" for a fraction the cost.

Quick spring swap - Turn the spring rest a quarter turn and it unlocks for easy spring swapping and spacer tuning.

Lightweight, Self-tensioning frame - With a combination of canted screw bores, unconventional joinery techniques, and a healthy dose of keying features, the frame panels are preloaded against each other without the need for a bar tensioner. The blaster is remarkably rigid despite not using flat bar, and much lighter than designs that do.

Baller Customization - The whole shell prints flat for optimal strength. This also means you can easily AMS skins onto the first layer with almost no purge filament.

Integrated barrel collet - Quickly swap between barrels with no tools. 

4-point adjustable stock - Designed with velociraptors and gibbons in mind. 

View the BOM here: https://docs.google.com/spreadsheets/d/1O0dQbupgveN6VRQrPYz316ZOcr5q0UTBdK9yiOfWQlk/edit?usp=sharing

Hardware Kits:

 https://www.etsy.com/listing/4314746954/pre-order-nerf-ontos-springer-hardware?etsrc=sdt

https://1000screws.square.site/product/ontos-hardware-kit/27?cp=true&sa=true&sbp=false&q=false (Ships to Canada Only)

Changelog

6/16/2025 - v1.1

Revised the design of Endcap and Spring Rest for more strength. Recommended stronger print settings for Endcap. As there have been no reported failures of the previous Endcap Assembly design, this is a preemptive change. Testing of the previous Endcap Assembly showed that the tabs wouldn't start to bend until above 40kg force, or about 2x the weight of the strongest recommended spring. However, because the breakage of any stressed component in a blaster is a potential safety hazard to the user, I decided, as an engineer, that raising the safety margin as far as reasonably possible would be the most responsible course of action. 

6/10/2025 

-Added chamfer on Plunger Head because I'm OCD. 

-Updated .STEP with models of the internal volume of the blaster to make it easier to design mods/reshells. 

-Added Aggressive Seal Plunger Head for air seal tuning. More sealing action at the cost of slightly increased friction.

Read more Show less

Print spec

Formats
3mfpdfstepstl
Model files
39
Total size
65.6 MB
Largest file
11.9 MB

0 comments

See all