Skip to main content
F3D
Bladerunner (Bản cải tiến thẩm mỹ cho dòng Free/Voidrunner) 1

7 images

Large file collection Đồ Chơi Ngoài Trời

Bladerunner (Bản cải tiến thẩm mỹ cho dòng Free/Voidrunner)

Remix of Voidrunner - Blaster chuyên dụng cho thi đấu KoTH By Flygonial

By Tomac

Downloads
6
Likes
8
Views
146

Files 24 120.9 MB

  • mag_release_1784881291.stlSTL · 1.6 MB
  • Large_Battery_Door_1784881293.stlSTL · 2.3 MB
  • TriggerGroupRight_1784881294.stlSTL · 497 KB
  • muzzle_holder_1784881295.stlSTL · 805.6 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

The Bladerunner is effectively a Voidrunner with some cosmetic retouches and some slight hardware variation. It retains the same compatibility with the same motors, flywheels, machined cage, and BCAR. 

Bill of Materials:

  • x2 M3x20

  • x3 M3x25 (2 for cage mount, 1 for switch cover)

  • x12 M3x8 (for BCAR) 

  • x12 MF63ZZ 3x6x2.5 bearings (for BCAR)

  • x1 M3x14 (could be 12 to 16, for upper switch mount)

  • x13 M3x10

  • x9 M3x5x4 heatset inserts

  • x1 M3 hex nut (for battery door, I recommend supergluing the nut in place) 

  • x5 M3x12 pins

  • x1 15-21A full-sized microswitch

  • 16-20 AWG silicone insulated hobby wire

  • x1 XT30 connector

  • x2 130-180 20.4mm brushed motors

  • x2 mini-sized wheels

  • x1 Machined 32.5mm Flycore Cage module (You can also print this out of PETG or PC)

It Effectively assembles the same as a Voidrunner (Freerunner with rev-switch) 

Chance's Build Guide 

You can contact me or Yoshifumi on Discord at r.delta.i or yoshifumishimizu respectively.

In the future, I intend to add a lower variant with fidlock mounts, some type of foregrip, and remote line support.


Thanks to atarabyte, charlescobostwick, summerr.exe, and michaelatmatterhackers for taking pictures at Opensauce!

Thank you Yoshifumi for beta testing!

Read more Show less

Print spec

Formats
stepstl
Model files
24
Total size
120.9 MB
Largest file
54.3 MB

0 comments

See all