Ốp băng đạn Worker 10rd Talon cho Ontos

I wanted a chunky sleeve for my straight talon magazines that contributed a little more to the theme of the Ontos.  These are definitely chunky, but the heft allowed me to add a little curve to them which is cool, and on a 10rd mag it meshes up against the magwell nicely.

The insert is separate so I could print it in a separate colour and glue them in place, but you could also leave it out if you wanted the window.  I included a cutaway to allow the mag release lever to depress fully and there's a recessed hole for an M3 socket cap bolt underneath to secure the magazine in place if you were to drill a small hole in the base.  Jamming a very thin shim down the side would probably be enough to avoid the bolt - I've used a strip of thin resistance band material and it works great.

I've included files where the "grip" sections on the front/back are separate in case someone finds that useful