
Hệ thống Air Assist cho Ortur Laser Master 2 Pro S2
- Downloads
- 280
- Likes
- 24
- Views
- 1,590
- Remixes
- 1
- Comments
- 0
Files 2 327 KB
- AirAssist_holder_1766193469.stlSTL · 238.5 KB
- AirAssist_guide_1766193470.stlSTL · 88.6 KB
Make a variant with AI
Build another version of this model.
Remix versions 1
See all 1 remixDetails
- Model ID
- #168492
- Category
- Máy In 3D
- Published
Description
Since I could not find a suitable AirAssist system for my Ortur Laser Master 2 Pro S2, I constructed one myself.
My laser module LU2-4-SF is 40x40 square, but it has an additional bulge to guide it in Z-axis.
The AirAssist consists of two parts:
1. holder for the nozzle
2. guide for the air hose
As nozzle I use a 3D printer nozzle with 1.0 mm hole (tip 8 mm, thread 5 mm). With this nozzle the airflow aims exactly at the focus of the laser beam.
The original Ortur laser shield is not obstructed and can be used as intended.
As pump I use a pond pump with an air flow of 16l/min. The air hose has a diameter of 4/6 mm (inside/outside).
To ensure that the air hose is well guided, I have partially guided it through the cable chain of the Ortur and constructed an additional cable support.
Print spec
- Formats
- stl
- Model files
- 2
- Total size
- 327 KB
- Largest file
- 238.5 KB
0 comments
You may also like 12 models
See all-

-
New -
New -
New -

-

-

-

-

-

-

-



