
Kệ 1U cho rack 10 inch Mini-ITX
Remix of Giá đỡ máy chủ 10 inch dạng module - Đã sửa đổi By mworks_eng_735326
- Downloads
- 89
- Likes
- 20
- Views
- 985
- Remixes
- 1
- Comments
- 0
Files 6 7.7 MB
- shelf-unit_1766174447.3mf3MF · 172 KB
- shelf-unit_1766174448.fcstdFCSTD · 7.3 MB
- io-shield-template_1766174450.3mf3MF · 20.5 KB
- io-shield-template_1766174451.fcstdFCSTD · 41.4 KB
Make a variant with AI
Build another version of this model.
Remix versions 1
See all 1 remixDetails
- Model ID
- #166094
- Category
- Dụng Cụ Tiện Ích
- Published
Description
You should print a small part of the model for test fitting
…because I cannot guarantee that my Mini-ITX board is the same as mine, especially in how far out the IO ports protrude from the motherboard itself.
Also, make sure you have enough vertical clearance! I had to really bend the cable of my ATX 24 pin to get everything to fit in 1U.
Assembly
Hardware required: 4 × M3*5 to secure motherboard to shelf unit, 4 × M3*8 or longer to secure IO shield to shelf unit.
- Secure motherboard to shelf unit with 4 × M3*5 bolts; the bolts should cut their own threads into the plastic standoffs of the shelf unit
The IO shield is optional but good to have. Since most Mini-ITX's ship with a > 1U IO shield, you'll likely have to design it yourself.
- Customize io-shield-template.3mf or io-shield-template.FCStd to fit your motherboard's IO
- Before fastening the customized IO shield to the shelf unit, thread the M3*8 or longer bolts into their holes to begin cutting threads into the plastic
- Finish fastening the customized IO shield to the shelf unit
If by some stroke of luck you have the exact same motherboard as I do, you can of course just use the io-shield-n100-nas.3mf. Here's the Taobao (basically, Aliexpress) product page for my motherboard:
Print spec
- Formats
- 3mffcstd
- Model files
- 6
- Total size
- 7.7 MB
- Largest file
- 7.3 MB
0 comments
You may also like 12 models
See all-

-

-
New -

-

-

-

-

-

-

-

-


